EN DE TEK - Site Search 

37 items found for ""

  • NDT | EN DE TEK Australia Pty Ltd | Warriewood

    Be the first to know! First Name Last Name Email I agree to receive information from EN DE TEK Australia P/L regarding new products & technologies along with product updates and equipment promotions. Subscribe Thanks for subscribing! TOP-QUALITY BRANDS Brand Names You Can Trust ABOUT EN DE TEK AUSTRALIA EN DE TEK Australia (formerly Krautkrämer Australia) has been supplying class leading quality equipment to the Non-Destructive Testing industry since 1989, and with the support of manufacturers including Baugh & Weedon, Duerr-NDT, Dellon, ETher NDE, Flawtech, Guided Ultrasonics, Krautkrämer (Waygate Technologies) and more, has developed a reputation for application solutions and after sales support. Covering a range of NDT methods including, but not limited to, Ultrasonics, MFL, Eddy Current, Hardness Testing, Calibration/Test Blocks, Remote Visual Inspection, Computed & Digital Radiography, EN DE TEK Australia’s range of products covers virtually every current NDT application. Our service department team have been to various suppliers for service training and have the capability to repair and calibrate Krautkramer, Ether NDE, Duerr NDT and Silverwing products to name a few, with this list continuously developing to further satisfy our growing customer base. We have started the process to become a NATA registered laboratory to provide calibration of NDT equipment and hopefully this will be completed in the coming months. With the added capacity to produce custom-configurable probe cables for UT and EC applications, our service department delivers a wide range of repair and calibration services to our customers. We pride ourselves on good customer service and top-quality equipment distribution and as such also offer on-site visits from both our sales team and service technicians to satisfy any customer requests which may be required. Through on-site visits, email or by phone, we aim to provide a range of customer services including general customer visits, NDT application queries, equipment setup/training and the potential for short training courses to be run at our office or on site. CONTACT EN DE TEK Unit 8, 2 Apollo Street Warriewood Sydney NSW 2102 sales@endetek.com.au + 61 2 9979 8777 PHONE OR FAX EN DE TEK Tel. +612 9979 8777 Fax. +612 9979 5050 ​ COME AND VISIT EN DE TEK Unit 8, 2 Apollo Street Warriewood Sydney NSW 2102 Monday - Friday 9:00 - 5:00 PLEASE EMAIL EN DE TEK Submit

  • BORESCOPES | EN DE TEK Australia

    Modular Video Borescope Tools and pushrod camera systems for remote visual inspection. The Dellon G+ Video Borescope Tool The Dellon G+ Video Borescope Tool ​ CMOS Camera offers 400 to 440 Thousand Pixel Resolution The G+ Supports interchangeable accessory probes for quick change out lengths and diameters in the following specs (2.8 mm 160 Thousand Pixel Resolution with a field of view of 120dg, Focal length 5mm to 30mm 1.5Mtr long stainless steel braided insertion tube) (4.5 mm 400 Thousand Pixel Resolution with a field of view of 80dg, 10mm to 100mm 2Mtr Tungsten tip driven borescope insertion tube) (6.2 & 6.4 mm 440 Thousand Pixel Resolution with a field of view of 120dg, 10mm to Infinity 2Mtr Tungsten tip driven borescope insertion tube) High Contrast 5" LCD Display Monitor Providing Smooth, clear, stable, live, and static inspection images. Mechanical Joystick Control 360 ° articulation, easy and flexible operation. Rotary fine-tuning step damper, make it easy and accurate to stop at the best viewing position. White balance, AGC, exposure, image mode, monitor brightness, monitor contrast, and monitor proportion are adjustable. Front-end LED optimized light, adjustable illumination 5 levels, rear-end bright LED auxiliary illumination. WIFI, input microphone, temperature sensor, photo stabilization, real-time image rotation, file rename, and text note functions. 3.7v/6000MaH Lion Battery offering 4 Hours of operation with a 5 Hour Charge Time The G+ can be powered and charged at the same time from its AC Adapter. Builders Inspection Camera, Engineers Inspection Camera, Wall Cavity Inspection Camera, DOWNLOAD G+ BROCHURE The Dellon GPro Video Borescope Tool The Dellon G-Pro Video Borescope Tool CMOS Camera offers 900 Thousand Pixel Resolution The G-Pro Supports interchangeable accessory probes for quick change out tip driven borescope lengths and diameters in the following specs (2.4 mm 300 Thousand Pixel Resolution with a field of view of 120dg, Focal length 5mm to 30mm 1.5Mtr long stainless steel braided insertion tube) (2.8 mm 300 Thousand Pixel Resolution with a field of view of 120dg, Focal length 5mm to 30mm 1.5Mtr long stainless steel braided tip driven borescope insertion tube) (3.9 mm 900 Thousand Pixel Resolution with a field of view of 120dg, 8mm to 80mm 2Mtr or 3.5Mtr Tungsten insertion tube) (6.2 & 6.4 mm 900 Thousand Pixel Resolution with a field of view of 120dg, 5mm to 50mm or 15mm to Infinity 2Mtr & 3.5Mtr Tungsten insertion tube) (8.4 mm 900 Thousand Pixel Resolution with a field of view of 120dg, 5mm to 50mm or 15mm to Infinity 2Mtr, 3.5Mtr or 6Mtr Tungsten insertion tube) High Contrast 5" LCD Display Monitor Providing Smooth, clear, stable, live, and static inspection images. Mechanical Joystick Control 360 ° articulation, tip driven borescope with easy and flexible operation. Rotary fine-tuning step damper, make it easy and accurate to stop at the best viewing position. White balance, AGC, exposure, image mode, monitor brightness, monitor contrast, and monitor proportion are adjustable. Front-end LED optimized light, adjustable illumination 5 levels, rear-end high-brightness LED auxiliary illumination. WIFI, input microphone, temperature sensor, photo stabilization, real-time image rotation, file rename, and text note functions. 3.7v/6000MaH Lion Battery offering 4 Hours of operation with a 5 Hour Charge Time The GPro can be powered and charged at the same time from its AC Adapter. Builders Inspection Camera, Engineers Inspection Camera, Wall Cavity Inspection Camera, DOWNLOAD GPRO BROCHURE The Dellon D Series Videoscope Tool The Dellon D Series Videoscope Tool Offers a high-resolution CCD image sensor providing super sharp and bright high–quality images with an objective lens tip that is focusable and can be swapped out to vary the focal length view and depth of focus. The aperture value is adjustable so the user can adapt the system for viewing multiple environments. ​ ✶ In case of no mains power, the battery belt could supply working for two hours electricity to the endoscope. ✶ Features include a 4-way controllable handwheel, dismountable, replaceable, easily and quickly get ideal inspection result. ✶ Supplied with a 12.6 V-1A adapter for powering and charging the system. ✶The CCD 1/4 sensor offers 410,000 pixels of excellent clarity and resolution, with better images in less ideal lighting situations providing more clear capture results. Highly lit LCD illumination allows easier inspection identification in direct sunlight situations. ✶Ergonomic design concept, with a friendly interface, and it is scientifically designed and suitable for a wide range of work environments along with being lightweight and portable. Features ​ 4mm, 6mm, & 8mm diameter testing probes in 1.5M to 15M lengths available 5.7 inch high resolution display Mini CCD/CMOS camera Bright LED illumination 40000Lux~60000Lux Detection line range up to 10m 360 degree viewing & four way articulation SD card for photo (JPEG) and video (AVI) storage Portable host suitable for single person operation Continuous working time 4-5 hours Rechargeable battery DOWNLOAD D SERIES BROCHURE The Dellon SE40 The Dellon SE40 Engineers Push Rod Inspection System ​​ The SE-40 Engineers Camera Inspection System is a compact and portable deploy anywhere pushrod camera system with three interchangeable camera heads, these include a 40mm pan/tilt colour camera a 24mm forward view colour camera, and a 2Mtr x 8mm diameter 2-way tip controlled video borescope. ​ Camera size: 40mm ⌀ can rotate : 360 °rotating x 180° with focus: Manual Adjustable Sensor: 1/4" colour CMOS Lens : f=3.6, F=2.3 View Angle: 90° Light: 12 LED lights Waterproof: IP67 Camera size: 24mm ⌀ Forward Viewing having a field of view of 100dg Camera size 8mm ⌀ Video Borescope with Two-way steering Length options: 1.5m-3m FOV: 10-1 00mm/25-oo Bending angle: two way, >120° Display Screen 7″ LCD (800*480) Semi-Rigid Fiberglass Pushrod Cable Material: Fibre cable Diameter: 5.5mm diameter Length: 30m Power Source Removable Battery Capacity: 11.1V, 7000MAH Removable Battery with LED power indicator Working Time: More than 4 hours The system is designed to record Video/ Photo capture for playback on-site or share with your client Date & Time stamping of recorded jobs Video 640*480 ASF Kits Working temperature: -10°C-50°C Language: 8 languages Memory: 8G (standard) Maximum 32G DOWNLOAD SE40 BROCHURE The Dellon PTZ41 Push Rod Inspection System The Dellon PTZ41 Features ​​ The PTZ41 multi-function all-in-one pipe camera which adopts advanced tech and equipment features with a high definition rotating camera can be used to inspect the pipe from 10mm to 300mm. The PTZ41 is convenient, flexible, economic, this system meets plenty of our customers' needs for varying inspections of regions of interest ​ Camera size: 40mm ⌀ can rotate : 360 °rotating x 180° with focus: Manual Adjustable Sensor: 1/4" colour CMOS Lens : f=3.6, F=2.3 View Angle: 90° Light: 12 LED lights Waterproof: IP67 Camera size: 24mm ⌀ Forward Viewing having a field of view of 100dg Camera size 8mm ⌀ Video Borescope with Two-way steering Length options: 1.5m-3m FOV: 10-1 00mm/25-oo Bending angle: two way, >120° Display Screen 7″ LCD (800*480) Semi-Rigid Fiberglass Pushrod Cable Material: Fibre cable Diameter: 5.5mm diameter Length: 30m Power Source Removable Battery Capacity: 11.1V, 7000MAH Removable Battery with LED power indicator Working Time: More than 4 hours The system is designed to record Video/ Photo capture for playback on-site or share with your client Date & Time stamping of recorded jobs Video 640*480 ASF Kits Working temperature: -10°C-50°C Language: 8 languages Memory: 8G (standard) Maximum 32G DOWNLOAD PTZ41 BROCHURE The Dellon 8.4mm Pushrod Camera System The Dellon 8.4mm Pushrod Kit ​​ Available from EN DE TEK for Purchase or Rent is our Mini Push Probe Kit which comprises an interchangeable forward-viewing 8.4mm ø camera head, offering a 25mm to ∞ focussing range that operates together with its 30 Mtr Pushrod that's housed inside a stainless steel reel and complete with a 7" intelligent touchscreen display controller that is all housed inside a rugged trolley style transport case. Once you own the 7" intelligent touchscreen display you can expand further to incorporate varying inspections because more accessories are capable of being integrated by purchasing an upgraded reel to use more interchangeable camera heads such as a 40mm Pan/Tilt Camera, 24mm Forward View Camera, Rigid Cameras, Video Borescopes. ​ The Dellon Binocular Measurement Videoscopes DOWNLOAD MEASUREMENT BORESCOPE BROCHURE The Dellon V+ 3D Scanning Measurement Videoscopes DOWNLOAD V+ BORESCOPE BROCHURE

  • Guided Ultrasonics | EN DE TEK Australia Pty Ltd | Warriewood

    QSR (Quantitative Short Range) Scanner ​ QSR The QSR (quantitative short range) is designed to semi-automatically scan predefined sections of straight pipeline looking at corrosion under pipe supports (CUPS). 6" - 24" pipe diameters 6 mm - 13 mm pipe thickness 9 kg weight Up to 12 hrs battery life -20° to +70° operating temperature DOWNLOAD QSR BROCHURE Contact Us Pipe Testing Instruments Wavemaker G4 Mini The latest Wavemaker G4 mini offers all of the traditional Wavemaker features and some new ones in a small and lightweight package. It also has the boost function (400V) for maximum energy transfer into the pipes and boasts a 12 hour battery life. DOWNLOAD Wavemaker BROCHURE Contact Us Pipe Testing Rings gPIMS In many situations, the cost of accessing a pope is much higher than the cost of inspection. This access cost can make repeat inspections with removable rings prohibitively expensive. The environmentally friendly robust gPIMS range of sensors has been developed to be easily bonded onto the pipe, sealed and then left in place. A cable connects the gPIMS sensor to a connection box that can be located in a convenient, easy to access location. By performing repeat inspections and comparing the results to previous inspections, operators can monitor for any change in the condition of the pope. Frequent data collection significantly improves sensitivity and reduces false call rates compared to conventional guided wave testing. DOWNLOAD GPIMS BROCHURE Compact Ring The Compact ring is the latest addition to the GUL guided wave transduction system which has been designed to be lightweight and low profile. This new system has be completely re-engineered to build on everything that has been done before, while reducing weight by 35%, axial width bu 30% and radial height clearance to under 38mm. This is an inspection system designed to tackle a wide range of inspection challenges. Solid Ring The solid transducer rings are typically used for standard screening of pipes with nominal size between 2 and 8 inches in diameter. The rings are attached to the pipe by tightening the two large handles which push the spring loaded transducers onto the pipe to obtain good shear contact. Standard rings have 2 rows of transducers to transmit torsional wave modes. Customised rings can be specifically produced in other sizes or with 4 rows of transducers to allow for inspection using both longitudinal and torsional guided wave modes. Inflatable Ring These transducer rings are designed to provide effective inspection capability, particularly for larger diameter pipes. Pneumatic pressure is used to press transducer modules (which are mounted onto this ring) against the pipe wall. These modules are fully interchangeable between inflatable collars of all sizes. For sizes greater than 24-inch diameter, two smaller inflatable type rings can be linked together as detailed in a specific procedure for joining rings. Non-standard sizes (up to 60 inch) and 8-channel (non-EFC) rings can be produced to special order. Claw Transducer The extendable small diameter transducer or "Claw" is able to fit between closely spaced tubes where conventional rings cannot fit. There is also a remote access option where the tool head is attached to a 2-metre-long extension arm that allows inspection of difficult to access tubes or pipes. Different transducer spacing options are available. Low Profile "Slinky" The ultra low profile ring or "Slinky" was specifically designed to be able to fit around pipes that have a very limited radial clearance, like those commonly found in culverts or pipe racks. Typically less than 25mm of clearance is required to be able to mount these rings. Due to their design, the low profile rings covers smaller pipe size range than the traditional solid rings. The standard low profile rings are configured for API nominal pipe sizes (within an API 5L tolerance). G-Scan The G-Scan rail instrument sends guided waves down the length of a rail to look for any areas of cross section change. The guided waves that are created in the rail are able to detect cracks and corrosion in any section of the rail, including the 'foot' and 'toe'. ​ Because of this ability to detect corrosion areas that are normally hidden from higher frequency methods that access the rail from the head, the G-Scan system is often used to inspect level crossings that are susceptible to foot corrosion, but are difficult to inspect without disrupting both rail and road traffic. Guided wave inspection performed from outside of the level crossing can inspect the section while the road is still fully operational; rail traffic is often not disturbed if the period between trains is long enough. The results allow you to rank the crossings, extending the mandatory lifting time for some crossings, prioritising replacement for others. The current generation of the G-Scan uses the Wavemaker® G4 electronics and the WavePro software to collect, analyse, and report the guided wave data.

  • Baker Hughes Krautkramer Instruments | EN DE TEK Australia Pty Ltd | Warriewood

    NEW Generation Conventional Flaw Detection Instruments DOWNLOAD USM100 BROCHURE Conventional Flaw Detectors DOWNLOAD USM36 BROCHURE DOWNLOAD USMGO BROCHURE Phased Array Flaw Detector DOWNLOAD Mentor UT BROCHURE Dedicated Thickness Gauges DOWNLOAD DMSGO BROCHURE DOWNLOAD DM5E BROCHURE

  • Gb Inspections | EN DE TEK Australia Pty Ltd | Warriewood

    GB Inspection Systems GB Inspection Systems designs and manufactures probes and accessories for ultrasonic inspections. With over 30 years of experience, they service a multitude of industries including Power, Gas, Oil, Mining, Military, Rail, etc. ​Please contact us to see if GB Inspections probes can suite your needs. Contact Us Probes ​ Angle Beam Single Crystal Probes MWS Range Euro range angle beam shear wave probe with 8 x 9 mm single crystal in a stainless steel housing. Fitted with a Lemo 00 connector, giving very good sensitivity and resolution. SS Range Angle beam shear wave probe with Ø10 mm single crystal in stainless steel housing. A very popular and widely used probe with high sensitivity and good resolution. Fitted with a Subvis connector as standard or optional Lemo 00. Contact Us Straight Beam Twin Crystal Probes TC Range Euro range angle beam shear wave probe with 8 x 9 mm single crystal in a stainless steel housing. Fitted with a Lemo 00 connector, giving very good sensitivity and resolution. SMTC Range Angle beam shear wave probe with Ø10 mm single crystal in stainless steel housing. A very popular and widely used probe with high sensitivity and good resolution. Fitted with a Subvis connector as standard or optional Lemo 00. Contact Us

  • NDT Ex Demo & Second Hand | EN DE TEK AUSTRALIA

    Ex Demo & Second Hand Equipment At EnDeTek Australia, we occasionally have ex demo, second hand tried tested and re calibrated equipment looking for a new owner. Below is an overview of what we currently have x demo, second hand. Showcase Ex Demo ECA semi-flex probe, medium 17c, for non-ferrous, 3 m SKU: ECA-SFC-064-005-017-N03S More Information Coverage: 64 mm (2.52") Typical applications: Far-surface corrosion and subsurface cracks, Curved surfaces, such as pipes and pressure vessels. Also for flat surfaces. Alloys: Non Ferromagnetic Central frequency: 5 kHz Coils diameter: 6 mm (0.24") Depth of penetration: Up to 6 mm (0.236") Flexible/conformable: Semi-flexible Frequency range: 0.6-20 kHz Minimum pipe diameter (Circ. scan): 410 mm (16") Minimum pipe diameter (Longi. scan): 410 mm (16") Nb. of channels: 16 Nb. of channels required: 32 channels Nb. of coils: 17 Technology: Eddy current array Topologies: Long Single Driver (LSD) DefHi ECA probe, circ & axial array, Ø14.8mm MF, 5m SKU : DEFHI-ERBCA-148MF-N15 Description: DefHi® ECA probe with bobbin, circumferential array, and axial array. Rigid design, 14.8 mm diameter, MF 50-500 kHz frequency range, 5 m nylon cable. Comes with the Ectane® 160-pin connector and requires the Ectane® 128 option. Bobbin ECT standard probe, Ø 20 mm LF, 3m cable Microdur Hardness Testing Probe MIC 205 Standard Length Handheld without cable (Probe Only) 5 kgf Major Dia 19mm Height 162mm Microdur Hardness Testing Probe MIC 2010 Standard Length Handheld without cable (Probe Only) 10 kgf Major Dia 19mm Height 162mm DYNA D Standard Length Handheld without cable (Probe Only) impact device for rebound hardness testers for Retired MIC 20 Second-Hand Tested & Fully Functional

  • Sensor Networks Inc Ut | EN DE TEK Australia Pty Ltd | Warriewood

    Sensor Networks Inc. Sensor Networks specialise in the design and fabrication of industrial ultrasonic transducers and tooling for demanding in-situ test and inspection applications. Engineered for precision, ease of use and maximum durability, their range includes ultrasonic transducers, fixtures and couplant delivery systems. Please contact us for enquiries regarding the Sensor Networks range. ​ SNI's deep domain expertise enhances NDT solutions through the selection, design and optimization of the ultrasonic technique. Offering a wide range of top-of-the-line standard transducers, our skilled engineers, technicians, assemblers and general managers bring the very best of the best to the table. ​ DOWNLOAD PROBE CATALOG Standard Transducers Model CR Standard Contact Transducers The larger element sizes of Model CR provide greater scan widths and penetration for applications such as plate, billet, bars, thick-section parts, pipe, and tanks. They have side-mounted BNC connectors and removable comfort grip to reduce operator fatigue. GP Series* offer the best combination of sensitivity and resolution. ​ Model F Fingertip Contact Transducers Model F are small diameter transducers with side-mounted Microdot connectors. GP series* offer the best combination of sensitivity and resolution for most applications. HR series* are highly damped for applications where high resolution is required. C series* have piezocomposite elements and offer superior penetration in highly-attenuative materials. All Model F transducers feature an ergonomic design for improved operator control and comfort. ​ Model DFR Fingertip Delay-Line Transducers Model DFR are small-diameter delay-line transducers with side-mounted Microdot connectors. Removable delay lines and highly damped piezoceramic elements enable measurement of very thin parts or detection of small near-surface flaws. Delay lines can be contoured for improved coupling to I.D. or O.D. curved parts. Custom sizes and shapes also available upon request. ​ Replaceable Delay-Line Pencil Probes Pencil probes are designed for applications requiring a very small contact face, such as curved turbine blades or thickness measurement from the inside of a pit. They can be used with most flaw detectors and precision thickness gauges. Interchangeable delay lines are tapered to tip diameters of 0.065 inch (1.7 mm) and 0.090 inch (2.3 mm). Replaceable delay lines are available in packs of 10. The straight model features a removable handle, which also allows it to be used as a fingertip probe. All models have Microdot connectors. ​ Model DU Dual-Element Contact Transducers Model DU are general purpose dual-element transducers with side-mounted microdot connectors. Replaceable/interchangeable delay lines and cross-talk barriers greatly extend versatility, cost-effectiveness, service life, and can be contoured to fit I.D. or O.D. curved surfaces. ​ Model ADP Dual-Element Contact Transducers Model ADP are small-diameter, low-profile transducers with 2 fixed co-axial cable and BNC connectors (also available with Lemo-00 upon request). They are especially suitable for flaw detection and thickness measurement on pitted, curved, and irregular surfaces. Because the elements are mounted on internal delay lines they can be contoured to fit I.D. or O.D. curved surfaces. ​ Angle Beam Transducers AWS, SWS, QS, MSWS Model AWS transducers and wedges meet the requirements of American Welding Society Structural Welding Code D1.1 and Bridge Welding Code D1.5. Transducers are available with piezoceramic elements (GP series*) and piezocomposite elements (C series*). ​ Model SWS are designed for general weld inspection and other applications such as pipes, tanks, pressure vessels, forgings, and castings. They have top mounted BNC connectors and are available with piezocomposite elements (C series*). Interchangeable acrylic wedges provide maximum versatility and service life. ​ Model QS features Quick Swap screw-in wedge attachment. They are available with top-mounted Microdot (MD) or new MCX low-profile swivel connectors. Piezocomposite (C series*) offer superior penetration and signal-to-noise ratio in highly-attenuative and coarse-grain materials. ​ Model MSWS have captive screws for wedge attachment and angled Microdot connectors for applications requiring low profile. Piezocomposite (C series*) offer superior penetration and signal-to-noise ratio in highly-attenuative and coarse-grain materials. Model MWB+/MWK+ Angle-Beam Transducers Models MWB+ and MWK+ are small transducers with side or top-mounted Microdot connectors and integral wedges for maximum versatility. GP Series* (MWB+) offer the best combination of sensitivity and resolution. C series* (MWK+) with piezocomposite elements offer superior resolution, penetration, and signal-to-noise ratio in highly-attenuative and coarse-grain materials such as austenitic stainless steel or cast iron. TOFD Angle-Beam Transducers Time-Of-Flight Diffraction (TOFD) is a method used to determine the size of cracks in metallic welds. It requires highly-damped, broadband transducers and wedges that generate refracted longitudinal waves (L-waves). SNI’s TOFD transducers have state-of-the-art piezocomposite elements (C series*) and Quick Swap screw-in wedge attachment. Straight-mounted connectors are Microdot (3/8-32) or Lemo-00 (M12 case). Immersion Transducers ​ Model I1 are small-diameter, pencil-type transducers with straight-mounted Microdot connectors. Because the connectors are not waterproof, sealing with non-water-soluble grease is recommended. GP series* offer the best combination of sensitivity and resolution for general applications. HR series* are highly damped for applications where high resolution is required. C series* have piezocomposite elements and offer superior penetration, resolution, and signal-to-noise ratio in highly-attenuative and coarse-grain materials. All model I2, I3, and I4 transducers have straight-mounted waterproof UHF connectors. Available I2 element diameters are 0.25, 0.375 and 0.5 inch (6, 10, and 13mm). I3 have 0.75 inch (19mm) and I4 have 1.0 inch (25mm) element diameters. GP series* offer the best combination of sensitivity and resolution for general applications. HR series* are highly-damped for applications where high resolution is required. C series* have piezocomposite elements and offer superior penetration, resolution, and signal-to-noise ratio in highly-attenuative and coarse-grain materials. ​ Model IR transducers have right-angle-mounted waterproof UHF connectors and small case design for applications where space is limited. Available element diameters are 0.25, 0.375, and 0.5 inch (6, 10, and 13 mm). GP series* offer the best combination of sensitivity and resolution for general applications. HR series* are highly damped for applications where high resolution is required. C series* have piezocomposite elements and offer superior penetration, resolution, and signal-to-noise ratio in highly-attenuative and coarse-grain materials. ​ Paintbrush Transducers are single-element immersion transducers which give a greater scanning width than conventional transducers with round or rectangular elements. They are often used in scanning tanks where large plates, bars, and other parts are tested which have large surface areas. Their large coverage decreases scan time dramatically. Like other conventional probes, they can be ordered with GP*, HR* or C* performance and are available in flat or cylindrical focuses. ​ Model IR Immersion Transducers Model IR transducers have right-angle-mounted waterproof UHF connectors and small case design for applications where space is limited. Available element diameters are 0.25, 0.375, and 0.5 inch (6, 10, and 13 mm). GP series* offer the best combination of sensitivity and resolution for general applications. HR series* are highly damped for applications where high resolution is required. C series* have piezocomposite elements and offer superior penetration, resolution, and signal-to-noise ratio in highly-attenuative and coarse-grain materials. Paintbrush Transducers Paint Brush are single-element immersion transducers which give a greater scanning width than conventional transducers with round or rectangular elements. They are often used in scanning tanks where large plates, bars, and other parts are tested which have large surface areas. Their large coverage decreases scan time dramatically. Like other conventional probes, they can be ordered with GP*, HR* or C* performance and are available in flat or cylindrical focuses.

  • Ultrasonics | EN DE TEK Australia Pty Ltd | Warriewood

    ​ ULTRASONICS Conventional Flaw Detection Instruments DOWNLOAD USM100 BROCHURE DOWNLOAD USM 36 BROCHURE DOWNLOAD USM Go+ BROCHURE DOWNLOAD USN 60 BROCHURE Thickness Gauges DOWNLOAD DMS Go+ BROCHURE DOWNLOAD DM5E BROCHURE DOWNLOAD AUDIT 207 BROCHURE UT Probes DOWNLOAD CATALOGUE Phased Array Probes DOWNLOAD CATALOGUE Railway solid axle front face UT inspection DOWNLOAD BROCHURE

  • CABLES | EN DE TEK Australia

    AUSTRALIAN MADE CABLES Our cables are made to order so we can accommodate for all our customers requirements. Custom sizing and connector configuration are available upon request. Our cables cover most Ultrasonic Flaw Detector and Eddy Current units. We have a limited number of standard length cables available in our Online Store . For other orders or enquiries contact us at +61 (02) 9979 8777 or email us at sales@endetek.com.au . A picture of our supported connectors can be seen at the bottom of the page. SINGLE CONNECTOR CABLES 29A001 CB819 CB820 BNC to Microdot Lemo 00 to Right Angle Lemo 00 Lemo 1 to Right Angle Lemo 00 CL331 MMKL MPC Lemo 00 to Microdot Lemo 00 to Lemo 00 Lemo 00 to Subvis MPKB Lemo 00 to BNC PC MPKL Lemo 00 to Lemo 1 PKB MPKM Lemo 1 to Microdot PKLLsp (RG 174 CABLE) Lemo 1 to Subvis Lemo 1 to BNC Lemo 1 to Lemo 1 with RG-174 cable PKLL (RG 58 CABLE) Lemo 1 to Lemo 1 with RG-58 cable TWIN CONNECTOR CABLES Lemo 1 Instruments (USM35, USM36, Sonatest, Epoch, etc) SEKL Lemo 1 to Lemo 1 with RG-174 cable SEKM SEKG Twin Lemo 1 to Microdot Twin Lemo 00 Polarising Plug to Lemo 1 TPC Twin Lemo 1 to Subvis Lemo 00 Instruments (USMGO, DMSGO, DM5E, etc) DA231 DA233 Twin Lemo 00 Polarising Plug to Lemo 00 Polarising Plug Twin Lemo 00 Polarising Plug to Lemo 00 DA238 Twin Lemo 00 to Microdot MTPC Lemo 00 to Twin Subvis DA235 Twin Lemo 00 Polarising Plug to Microdot Dual Size Cable Adapters ADT 004 Lemo 00 Polarising Plug to Twin Lemo 1 Socket AD-Socket Twin Lemo 00 to Microdot Typical Connector Types Lemo 1 Lemo 00 Polarising Plug (Lemo 00) Microdot (10-32) Subvis (SMC) BNC Right Angle Lemo 00